FAQ's

You can plug in any appliance that does not exceed the maximum wattage of 500 watts. This can be a table/floor lamp for light deterrence, a strobe light for security effect, or a radio for sound deterrence.

Yes, any three-way adaptor plug can be put directly into the scanner allowing you to plug in multiple devices. A six-way power strip can also be used to provide additional plugs and an on/off switch for noise appliances

One Scanner is sufficient to cover all entry points in your home. However, you can provide additional protection and deterrence by adding additional scanners. Wherever you would want to create activity (i.e. – upstairs, back room) an additional scanner would give you that flexibility. The remote control has the ability to control up to 5 separate scanners

The Security Scanner works by monitoring PULSE COMPRESSION waves that are created when a window or door in the home is disturbed. The scanner incorporates a special sensing circuit that detects inaudible pulse waves associated with the opening of or breaking of windows or doors. It is a passive scanner that listens for these types of waves that are created during an intrusion.

If your Security Scanner is active when you are at home, you will set it off by entering and leaving your home. Interior doors should not set it off if the sensitivity of the unit is set correctly. Normal activity inside the perimeter of the home will not cause the unit to activate.

The REACTOR PRO Scanner is a passive listening device; it does not transmit or emit radio waves or any kind of radiation. It is safe to use with children or animals in the home. Unlike other motion devices, this scanner will not be set off by the movement of your animals.

Your Scanner is completely portable because there is no special installation instructions needed. Simply plug the unit into an outlet and it will scan the perimeter of any dwelling that it is installed in. Therefore you can use it when you go on vacation or can take it to another residence when traveling.